"T-CeraPro" ceramic coating for car paint.
The world's hardness 9h ceramic car coating
AQuartz T- CeraPro Cearmic Car Coating
AQuartz Ceramic Car Coating Agent with the World's Best Hardness of 9h
- Scratch Defense Test Video -
:: KEY BENEFITS ::
* Suitable for finishing car paint plus plastics, wheels, leather, etc.
* The easy application method, which just rubs the surface like cleaning a table, makes it easy to coat your car in less than an hour.
* Protects against nail scratches on car door handles.
* It has the world's strongest hardness, so it protects the surface from various life scratches for a long time.
* Can be coated on any color of car paint, no stain problem of black color car even without any problems.
* Very high slipping effect and Excellent Water/Dirt Repellent effect - Long-lasting Hydrophobic effect.
* No stain surface, no water spot, no cracking, no swirl marks.
* Semipermanent lasting, easy to clean surface/self cleaning effect.
* High Deep Gloss & brightness and Color Renew.
* Anti-Stick, Anti-Dirt, Anti-Graffiti, Anti-Fingerprints, easy to clean the surface against salts, calcium, oil, grease & other contaminants.
* Weather ability and car original color retention. - Excellent chemical resistance.
* Easy to clean surface against salts, calcium, oil, grease & other contaminants.
* Stops salt efflorescence, moss & algae rejecting.
* Prevents sticking of insects and bugs, insect, flies, moss & algae rejecting.
* Preserves sale Value of a New Car.
* Preserves resale Value of a Used Car.
* It is possible to wash your car with a Automatic car washing machine after coating.
* No more need to wax or polish.
* Remaining liquid after use can be reused after storage.
:; CHEMICAL PROPERTIES ::
* Chemical Mixture : Methylhydrogenpolysiloxane, Diethyleneglycol monobuthylether acetate, Heptadecafluorodecyltrimethoxysilane, etc..
* Color : Transparent Liquid.
* Odor : Mild odor.
* pH Value : 6.0~8.0 @20°C.
* Available Container : Any plastic bottle.
* Flash Point : 60ºC (Open Cup).
* Virtually insoluble
:: T-CERAPRO USER GUIDE ::
- A must-read for a beginner with no coating experience before coating
:: Preparation Materials ::
+ Approximately 20~30ml per one complete full-sized automobile(one layer).
+ One small microfiber towel for coating liquid applying, one clean microfiber towel for surface buffing and one microfiber towel for finishing.
** Always use a soft, swirl-free, oil-free microfiber cloth when coating and polishing.**
1. Shake well to mix, pour 3~5 drops on the surface or the applying microfiber towel.
2. Spread it evenly on each car panel.
3. Wipe & polish contents in circular motions with DRY/CLEAN microfiber buffing towel gently until no marks left continuously.
4. Wipe all patches or streaks off from the surface with the towel turning both sides alternately.
Enough buffing/polishing is required until all patches or streaks are removed.
5. Finish by wiping down with a new microfiber towel.
6. Repeat steps 2~4, finish by wiping down with a new microfiber towel.
7. Let dry it up, it takes 8 hrs to cure at 35℃.
In below 25℃ or a cloudy weather, use a heater gun or IR heater to get a short curing time.
++ We recommend applying additional costs after the coating has dried for about a week. 2~3 layer coatings will give more thickness, durability and hardness.
** If you coat AQuartz T-Cera on top of T-CeraPro coating, you can get more perfect results.
::: IMPORTANT POINTS ;::
** Last curing step is very import, it will decide whether short or long lasting.
** Use a heat and the wind to get a fast curing the surface coated.
** The heat Temp. : about 50~60℃ with raising the wind, Intervals of 40~50cm
** If it is too hot(over 110℃), it makes to lose hydrophobic effect.
** When it's over 30℃, dry it by exposure to the sun if you don't have a heater.
** Completely dry with NO rain takes over 24h at 30°C. - Do not drive the car during this time.
** Dry to touch: about 8 hours / Completely dry: about 1 week(Hardness Testable)
**If it is colder than 25 ° C, the winter season, or the curing conditions are not favorable, we recommend to use T-Fusion Top Coating with chemical curing type of irrelevant curing temperature.
::: WIDE APPLICATION FOR T-CERAPRO USE :::
+ T-CeraPro can be coated not only on vehicle paint but also on plastic and metal surfaces,
+ Can be applied on the finished product surface of paint, stainless steel, aluminum, bronze, tin, glass tile, anodizing, plating, Polycarbonate, plastic, etc.
+ Mobile Phone glass, Home mirrors, Paint surface ( Refrigerator, Air Conditioner, Table glass, Ceramics, etc)
+ Glass, windshield surface coating is difficult to coat, so unless you are an expert, do not use it and instead coat it with T-Cera.
::: REFERENCE :::
- Working Temp. : 5 ~ 35°C.
- Heat Gun Temp. : 70~80°C, Intervals of 40~50cm.
- One layer Thickness: 0.4~0.8μm
::: PRECAUTIONS :::
- Avoid mixing it with detergents or any other products.
- Do not use for other purpose.
- Wash your hands with soap and water after application.
- Don’t drink and avoid long time skin contact.
- If accidentally splashed in the eyes, flush immediately with water for at least 15 minutes.
- If accidentally swallowed, seek immediate medical attention by calling your local Poison Information Centre.
- Keep out of reach of children.
::: STORAGE :::
- Store in a cool, dark place.
- More than 24 months shelf life time if closed well and kept in average room temperature.
(-5~20 deg. : 24 months, 20~35 deg. : 12 months long).
Have any question?
